by: KT
$ 831.00
Drifter Pro Compact
The Drifter Pro has a completely flat rocker where the foil is attached. The foil is at 90 degrees to the board. When foiling it creates neutral lift. These boards have a nice entry for bouncing off the water and beveled rails to bounce off when you are in turns and hit the water. The tail bevel acts the same, allowing you to ride a longer board and yet the board will not touch down in the tail and hit as quickly. The boards also have a concave deck with a kick tail that acts as a skateboard tail in that you have something to push off of when turning. It also puts your back knee in a better position to foil.
I would suggest putting the foil centered to start and move it back if you want less lift, and forward if you want more lift. For smaller waves move the foil forward, for bigger waves move it back.”
ISS, Integrated Stringer System: Dual Futures 10.75” finboxes tie directly into high density foam stringers, seamlessly connecting the base of the mast with the board, tail to nose, so wherever you step, you’re good to go, and so is your board.
TwinpairTM Carbon Exoskeleton: Literally working in melted conjunction with the ISS, these dual carbon strips finish off the highest grade flex control we’re giving these foil boards. There’s no wobbeling, no lag, no softness. These boards are as crisp and direct as it gets. Designed and engineered specifically for foilboarding, this Pro construction reflects our undivided dedication to the discipline.
Drifter Carbon F
This is that high volume compact shape.
With a fuller outline for ease of paddling and stability when in the air. A slight concave deck gives you a more connected feeling, acting like a skateboard deck where you always find something to push on when turning and pumping.
KT Surfing’s signature Quad Concave Bottom with beveled rails and concaves in the bevels are optimized for the softest and quickest touchdown and release.
Cutouts have been introduced for less surface area and to make the board feel smaller than it is. A beveled tail further softens the takeoff and release.
The construction is built around an EPS core with Carbon and Glass laminate encompassing the deck and bottom. Specific reinforcements create a zero-lag symbiosis with the foil.
All sizes come with inserts and pads, but without straps.
Drifter Carbon S
Medium volume with a performance oriented outline.
The Drifter S brings along an aggressive outline with a narrow nose and tail for a much more surfy foiling style. Less hips to catch the water when you position yourself into extreme turns.
A slight concave deck delivers a more connected feeling to your feet. It acts like a skateboard deck where you always find something to push on when turning and pumping.
KT Surfing’s signature Quad Concave Bottom with beveled rails and concaves in the bevels are optimized for the softest and quickest touchdown and release.
Cutouts have been introduced for less surface area and to make the board feel smaller than it is. A beveled tail further softens the takeoff and release.
The construction is built around an EPS core with Carbon and Glass laminate encompassing the deck and bottom. Specific reinforcements create a zero-lag symbiosis with the foil.
All sizes come with inserts and pads, but without straps.
Model | Size | Volume L |
Compact | 4-4 | 30 |
Compact | 4-10 | 35 |
Compact | 5-0 | 40 |
Drifter F | 4-4 | 34 |
Drifter F | 4-8 | 38 |
Drifter F | 4-10 | 42 |
Drifter F | 5-0 | 50 |
Drifter F | 5-4 | 56 |
Drifter S | 4-4 | 25 |
Drifter S | 4-8 | 29 |
Drifter S | 4-10 | 33 |
Drifter S | 5-0 | 41 |
$ 1,699.00
The Flying V is Jimmy’s latest foil SUP. Featuring max volume and blocky rails for maximum stability and paddling, the Flying V allows the rider to ride a much shorter board than usual for the ultimate in foiling performance. The beveled chine rails provide easy lift-off and touch-down, and the tail lift keeps the tail clear when pumping.
These short lengths allow for much better performance, maneuverability, and glide once on foil and the extra width through the full outline of the board, especially the tail, gives you incredible stability, paddling and tracking for these short boards.
The rocker line was also designed with stability, tracking, and paddle speed in mind but also to not “stick” in the nose when coming down from the foil. The tail rocker is also very important in giving you that initial “pop” and water release to effortlessly get up on foil. We were very lucky to work with Alex Aguera from Go Foil who helped us with the testing/development of these boards and gave us expert knowledge on optimum Tuttle box placement as well as ideal stance and foot placement.
Generally a lighter board will allow you to glide longer on foil which makes our Signature Sandwich constructions the perfect match for these boards to keep them very light weight while giving maximum strength and reinforcement for the Tuttle box. The deck pad has a center line as well as two horizontal lines for riders to get an accurate and quick visual reference for foot placement for riding without straps. Board has 5 different insert options for foot strap location and comes with foot straps.
The boards feature both a Tuttle box and a plate attachment for maximum flexibility.
Sizes and Volume:
$ 2,399.00
With 363 liters, the Searcher is our largest SUP and is incredibly versatile. It’s perfect for heavier riders and will float virtually anyone…and their dog. The displacement bow cuts through chop and boat wakes. The round rails and performance rocker line make it perform much like a race board, but much more stable. Going on an expedition? The Searcher has 4 sets of tie-down inserts in the tail and 3 sets in the nose so you can take everything with you. Also for 2016 we’ve strategically placed 5 RAM mount inserts to give you the option to turn the searcher into the ultimate fish catching platform.
Comes with 8″ JL tracker fin.
$ 2,299.00
The flawless rocker line and shape characteristics translates into effortless downwind runs. The 28″ width makes this board very forgiving for any size rider and allows the rider to get on a glide easier and to stay on a glide longer. Flat bottom from front through the center is a very low drag bottom shape that blends into a “V” in the tail for effortless rail to rail responsiveness.
Comes with 8″ JL Tracker fin.
$ 1,999.00
The Mission was originally designed as a downwind board and it’s a great at that, plus a lot more. It’s fast on flat water, and is much more stable than the 29 1/4″ width would make you think. Hard edges in the tail lock it in when you’re dealing with nasty chop and there are no conditions where this board is out of place. It does it all!
Comes with 9.5″ JL Swept Fin.