Kiteboarding Surf Style

Packed with state of the art technology, the new generation of ultra high performance kite is here: the R1. The R1 was born through radical design ideas during the development of the Chrono.

Developed without compromise using proven Chrono technology, the R1 produces breath-taking speed and performance. The ultra clean leading edge, smooth surfaces and number of cells give an insight into its capabilities. But it's what you can't see that makes this race focused kite so special, the feeling on the bar and the responsiveness of this high aspect wing is unique.

Our newly calculated sail tension brings a level of stability that surpasses every high performance kite we have ever produced by far. Combined with new diagonal ribs, a high aspect ratio planform, reduced cell width and a new high performance profile the boundaries of performance have been re-defined again. The R1 is truly a race pedigree performance kite that will inspire confidence to the rider while delivering outstanding racing performance on the water, land or snow.

The R1 is for advanced riders only who have previous foil kite experience. It is not difficult to fly but there are techniques required to fly a high aspect ratio foil kite.

The R1 will require maintenance just like any high performance equipment in racing sports, for example replacing tires or piston rings on motorbikes, the R1's Speed System and Bridle Lines must be checked after every 60 hours flying time, if they worn or are not to factory specifications (+ or - 1 cm) then they must be replaced or the kite will not perform as designed.Ozone R1 bridle specs.

The R1 is a closed cell foil and is water re-launchable, but we recommend that you keep it flying and out of the water if possible! A drainage system on the wing tip allows any water that may have entered the kite to drain out.

The R1 features a simple yet effective front line flag out release. After releasing the flag out you should check the speed system, bridle lines and your flying lines for twists before restart.

The R1 is not a wave kite and should not be used in waves.

Design and Performance Features:

• High cell count – The high number of cells in the R1 reduces ballooning between the cells holding the wing shape and surfaces smoother and cleaner. This creates a reduction in turbulent airflow, giving the R1 more speed and increased depower.
• Optimized leading edge air intakes – Precisely positioned intake valves along the LE lead to a stability increase and a more solid kite downwind. The inflation is also now easier and safer as the kite rapidly inflates.
• LE profile reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow.
• Internal diagonals and straps – Internal span-wise straps work in unison with optimized diagonal ribs, distributing load into and across the sail evenly and effectively. Together the diagonals and straps lower sail tension and increase the structural balance that helps control this high aspect ratio kite.
• High performance bridle lines – Using high performance thin Kevlar bridle line, the R1 flies faster, and so accelerates faster giving it higher performance, more range and more depower due to less drag.
• High performance materials – High-tenacity sail cloth with extremely low porosity values and an overall lightweight enable us to further stabilise the canopy and maximise fast flight characteristics.
• Velcro + water out channels – A 20mm internal channel is shaped into the end of the cells along the trailing edge to allow water run-out between the cells and out of the tips during flight. The Velcro dirt out channels can be opened for cleaning the kite. Always clean your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.

Construction Features:

• Exceptional hand checked Ozone factory construction using the highest quality materials.
• High performance light weight canopy material.
• Leading Edge profile plastic batten reinforcements.
• Internal diagonals and strapping improve load distribution and durability.
• High performance low-drag bridle lines.
• Optimised Leading Edge air intake valves for fast inflation and no deflation.
• Unique internal wing-tip drainage system to remove water while flying.
• Double pulley speed-system, utilising the latest high spec low friction Ronstan Orbit pulleys.
• Color coded and numbered fool proof line connectors.
• Velcro openings on last tip cell for easy wash out of debris and water.
• Water proof deflation zipper on top centre cell for easy and fast deflation.

Our design goal with the second version was to take the original Chrono’s high performance characteristics and make it easier to use for riders looking for all around ability in any conditions on any surface. The Chrono V2 is more stable and easier to inflate; additionally this model has thicker sheathed Dyneema bridle lines to reduce tangles on the ground. New sizes cover a wider range of conditions to personalize your high performance quiver.

The Chrono V2 is for experienced riders with good kite control skills or previous foil kite experience. It is not difficult to fly, but there are specific techniques required to ground handle and fly high aspect ratio foil kites safely.

Experienced riders will find themselves at home with the Chrono V2. On the water with a Twin-tip the Chrono V2 large sizes are light wind monsters - loads of power, easy to jump and stable. Due to the abundance of power and efficiency, gaining upwind ground is ridiculously easy. In light winds it is impressive how high and floaty jumps can be! When the wind picks up and you are looking for serious height the smaller sizes really shine, no question at all, these are pop and go big machines, just edge hard and send it, too easy!

Riding with a Foil or Race board the benefits are immediately noticeable thanks to the longer lifting period a foil kite gives you during that critical tacking moment compared to an LEI. The combined performance of the kite and these types of boards makes 4 knot riding a true reality.

On the snow the Chrono V2 takes the sport to another level, more power and performance in light winds, extended jump and flight time with a much better glide angle. The improved handling makes it possible to ride in lighter winds just by generating apparent speed, which means you can take a smaller size.

On the land the gains we have made in kite stability mean that you can work on your landboard freestyle moves without worrying about the kite collapsing or falling out of the sky. For buggy riders the improvements mean freestyle or racing maneuvers are easy and more intuitive with smoother coordinated handling.

The Chrono V2 is a closed-cell foil and is water re-launchable, but we recommend that you keep it flying and out of the water if possible! Using the re-launch webbing handle that connects the rear flying lines it is possible to reverse the kite off the water and continue riding. We recommend you practice this technique. An internal drainage channel running through to both wing tips allows any water that may have entered the kite to drain out. The Chrono V2 is not a wave kite and should not be used in waves.

The Chrono V2 features a simple yet effective front line flag out release. After releasing the flag out always check the speed system, bridle lines and flying lines for twists before restart.

The Chrono V2 will require maintenance just like any high performance equipment in racing sports, for example replacing tyres or piston rings on motorbikes. The Speed System and Bridle Lines must be checked after every 60 hours flying time, if they are worn or are not to factory specifications (+ or - 15mm) they must be replaced or the kite will not perform as designed.

Tech Specs:

• Performance Double Surface – The Chrono V2 lightweight double surface design is combined with a mid-high aspect ratio and 46 cells. The high number of cells means the ribs are positioned closer together, creating ultra smooth surfaces with reduced drag and maintaining a clean profile, resulting in superior flight efficiency.
• Mid-High Aspect Ratio and New Planform – The aspect ratio and planform have been re-calculated to be an optimum match with the profile for the ideal combination of stability and performance.
• Optimized Leading Edge Air Intakes – Newly designed intake valves are precisely positioned along the LE on the upper and lower surfaces. This leads to a stability increase and a more solid kite. The inflation is now easier and safer as the kite rapidly inflates from the center to the wingtips.
• Leading Edge Profile Reinforcements – The Leading Edge is reinforced with flexible lightweight plastic battens to maintain the shape of the profile during angle of attack changes and turbulent airflow.
• Internal Straps – Internal span-wise straps distribute load across the sail evenly and effectively, while also maintaining a cohesive internal balance controlling the high aspect ratio.
• Sheathed Dyneema Bridle Lines – Requiring less maintenance and less likely to tangle. The bridles are well proven; they are the same specification that we use on our Snowkite range. The lines are thicker and stiffer compared to the R1’s high performance Kevlar line, and the sheath makes them less prone to damage.
• Velcro and Water Out Channels – A 20mm internal channel is shaped into the end of the cells along the trailing edge to allow water run-out between the cells and out of the tips during flight. The Velcro dirt out channels can be opened for cleaning the kite. Always clean and dry your kite by emptying any water, sand or dirt as this will prolong the life of the kite and help it fly as designed.
• High Performance Materials – High-tenacity sailcloth with extremely low porosity values and an overall lightweight enabled us to further stabilize the canopy and maximize fast flight characteristics.

Construction Features:

• Exceptional hand checked Ozone factory construction using the highest quality materials
• High performance light weight canopy material
• Leading Edge profile plastic batten reinforcements
• Internal reinforcements and strapping improve durability and load distribution
• Mesh protected inflation valves for fast inflation and no deflation
• Double pulley speed-system, utilizing the latest high spec low friction Ronstan Orbit pulleys
• Color coded and numbered fool proof line connectors
• Velcro openings on last tip cell for easy wash out of debris and water
• Water proof deflation zipper on top center cell for easy and fast deflation